Industry standard

2023年9月13日
GASKET For JIS Flange With inner and outer ring

Spiral Wound Gasket for JIS Flange With Inner & Outer Ring

GASKET For JIS Flange With inner and outer ring
2023年9月13日
Refinery reforming reactor regenerator

ANSI B16.**, ASME B16.** standards ANIS and ASME Differences

ANSI B16.11, ASME B16.11 standards ANIS and ASME Differences
2023年8月3日
General mechanical class 8,0, 8MN fast forging hydraulic unit

METALLIC GASKET DIMENSIONS FOR PIPE FLANGES/ ASME B16.5 / ASME B16.47 SERIES B (API 605) / ASME B16.47 SERIES A (MSS SP 44)

Gaskets Dimension, ASME B16.5 / ASME B16.47 SERIES B (API 605)/ ASME B16.47 SERIES A (MSS SP 44)/
2023年6月30日

Flat gasket dimensional tables for flanges according to Standard ASME B16.21 (ANSI B16.5)

Flat gasket dimensional tables for flanges according to Standard ASME B16.21 (ANSI B16.5)
2023年6月29日
DISC SPRINGS STANDARD PRODUCT RANGE

Disc Spring DIN2093

Disc Spring DIN2093 TECHNICAL DATA, DIMENSIONS AND WEIGHT INDEX.
2023年6月27日

Flat gasket dimensional table for flanges according to Standard EN 1514-1

Flat gasket dimensional table for flanges according to Standard EN 1514-1
2023年6月13日
pyramid engineering plastic

Introduction of Engineering Plastics

Introduction of 8 common high-temperature engineering plastics [Common high-temperature plastics: fluorine plastics, PEEK, high-temperature nylon, PPS, PI, PSU, PAR, LCP].
2023年3月12日
PTFE LANTERN RING

PTFE Lantern Ring

PTFE Lantern rings, also well know by Universal Seal Cage are usually in the center of every compression packing set in a centrifugal pump. They are simple components, but get something wrong when selecting, installing or operating them, and big problems may occur in the stuffing box. A lantern ring is placed between packing rings in each packing set and extends the life of the packing, stuffing box and shaft. Ultimately, lantern rings increase the life span of the pump system.